H807SA Artnet to SPI LED Controller 8 Ports 8192 Pixels

H807SA Artnet to SPI LED Controller 8 Ports 8192 Pixels

Introduction

• The H807SA is an 8-port output detachable single-machine controller that can control up to 8192 points. It supports the Art-Net protocol, supports addressing DMA chips, can connect to the DMA console, and can add or delete DAT files through the local area network.
• Currently, the driver chips that can be controlled include DMX512, HDMX, APA102, APA102-65536, WS2801, WS2811, WS2812, WS2812, WS2813, TM1812, TM1809, TM1804, TM1923, TM1934, TM1925D, TM1926D, TM1803, TM1814, TM1913, TM1914, TM1926, UCSUCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, UCS8904, UCS5603, UCS9812, UCS2603, SK9816, SK6816 12. SM16716, SM16703, SM16709, SM16712, SM16704, SM16714, LPD6803, LPD8806, LPD1882, LPD1889, LPD1883, INK1003, APA104, P943, LC8812, GW6205, QED3110, D9866E, D9866B, D9865C, D9865E, D9865F, D9864B, D9864C, MBI6023, MBI6024, ADT6610, TLC5971, JCS0104, etc.
• LD1510, LD1512, and LD153X (which only support 8-bit mode)
• The supporting software is “LED Programming Software” V4.47 and above.

Performance characteristics

1. Eight output ports control up to 8192 pixels. Each port can control a maximum of 1024 points.
2. The SD card supports FAT32 and FAT16 formats and allows up to 64 DAT files.
3. Multiple synchronization controls can be achieved through a local area network.
4. You can switch files by sending UDP instructions to network port 2, obtain the current playing file number, etc.
5. Can connect to the DMA console, supports RGBW, can replace files, adjust speed and brightness, and has a fast response time.
6. Supports the Art-Net protocol and can directly use software that supports Art-Net, such as MADRIX and Jinx.
7. Support encryption functions for limiting the number of power cycles.
8. Supports addressing the DMA chip, with built-in counting and internal control testing functions.

Package:

• 1pcs H807SA Artnet to SPI LED Controller