DMX512 signal amplification function and prolong the DMX signal transmission distance; DMX512 signal distribution function, multi-level sharing after a DMX control system
Universal DMX-512 optical splitter; One input to four outputs (3-pin and 5-pin); Additional thru output (3-pin and 5-pin) (for linking to other Data Streams)
USB DMX Interface; USB to DMX Lighting Control Device; Windows, OSx & Linux Compatible; Compatible with a number of commercial and free lighting software packages
MAKE YOUR DMX FIXTURES ORGANIZED: 4 isolated outputs greatly save your setup time and the use of cable, reducing the risk of a plug failure or tripping over the wire.
3-PIN OUTPUT FOR UP TO 32 DEVICES: 3-pin male XLR inputs feed through a 3-pin female output. Each output can accommodate 32 separate devices.
KEEP TRACK OF SIGNALS: LED indicators inform you of the status of the signal going to the fixtures.
EASY TO SET UP: Installation of this DMX splitter amplifier is a breeze with a detailed user manual. No more spending minutes you are trying to trace down where the bad connection was!
PERFECT FOR MULTIPLE SETTINGS: This unit is perfect for any club, bar, stage, or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed about one another.
Product Description
Manage your DMX fixtures in a more organized fashion with this 4-way isolated splitter!
This unit is a flexible DMX splitter amplifier designed to distribute and boost incoming DMX signals from the input into four separate outputs.
Signal Amplifier
Four independent isolated output functions are used to avoid the system after the class DMX signal interference and sabotage one input.
DMX signals can be transmitted to various normal lighting equipment through this item, eliminating cable distance and device number limitations and ensuring the stage lights run smoothly.
Specifications:
Power input: AC88-256V 50/60Hz
Fuse (internal): F1A 250V
Dimensions: 9.35 x 7.77 x 3.84 inches
Weight: 2.2 lb
Package Included:
1 x Signal Amplifier
1 x Power Cable
1 x User Manual
Notes:
Please follow up on the user manual to operate.
Do not expose this unit to rain or moisture.
Please don't allow the children to operate it.
It should be cleaned only as recommended.
If there is a serious operating problem, stop using it immediately.
Wedding
Bar
Party
Stage
Similar Neon Light Strip that may be delivered to you quickly:
This 6.35mm TRS to dual XLR audio cable is used to split the 6.35mm stereo signal into two XLR mono signal outputs (left channel and right channel) for easy audio adjustment and accurate signal output for professional audio needs.
This 6.35mm to XLR stereo cable connector adopts gold plating process, the core adopts oxygen-free copper wire to ensure signal non-destructive transmission, and the wire body adopts PVC high-quality material, soft and durable.
Note: This 1/4 TRS audio splitter adapter cable receives the stereo signal and divides it 1 into 2, converting it into two separate XLR mono outputs, it cannot merge the two outputs into one input.
The standard 1/4" TRS plug with the XLR plug, plug and play, requires no battery or AC power, and the cable is portable, making it an excellent choice for music lovers, especially in the studio or for live performances.
Suitable for microphones DV cameras, video cameras, stage lights, mixing stations, power amplifiers, lamp power supplies, DMX lights, studio harmonics, speakers, wiring boards, club stages, KTV, home theater or other professional audio equipment.
FUNCTION AND USE: 3 pin XLR female to dual XLR male Y cable, this Y cable is used to connect XLR outputs to two XLR inputs, suitable for distributing microphone signals to the two channels on the mixing console
APPLICABLE SCENARIO: Compatible with devices with 3 pin XLR connectors, such as gun microphones, studio harmonics, mixboards, patch boards, preamplifiers, speaker systems, mixers, amplifiers, equalizers, limiters, dividers, digital decoders, and stage lights
BALANCED CONNECTION: This XLR use a balanced connection with pin 2 connected to pin 2, pin 3 connected to pin 3, and pin 1 connected to pin 1. Will help reduce interference and produce a stronger undistorted signal
HIFI AND CLARITY: 20 AWG 4N OFC with shielding ensures HIFI sound quality and provides maximum electrical conductivity and signal clarity. A great choice for music lovers, especially for studio or live performances. The cable only divides the mono signal into two mono signals and does not combine the signals into stereo signal sound switching
STABLE SIGNAL: With heavy duty XLR connectors, signal loss and static noise can be eliminated, providing durability and improving signal transmission, and the copper housing prevents any interference, thereby preventing loss of sound quality. Split closer to the XLR female end, the outer diameter of the wire is 4.0mm, and the total length is about 30CM
Product Usage: The Y shaped splitter cable is designed for use with microphone or other professional recording, mixing, or studio device with standard 3 pin XLR connector, connecting 2 microphone cables to a single XLR input on your mixer or PA system
Shielding Effect: The cable is made of 22AWG (ODr: 4mm) 4N OFC conductor, aluminum foil and woven copper wire double shielding, effectively eliminating interference and providing pure sound with low noise. The cable is also protected by a high density outer layer
Compatibility: XLR splitter cable is compatible with devices equipped with 3 pin XLR connector, such as mixing consoles, cameras, speakers, microphones, and power amplifiers; The total length of the cable is about 30CM, with a wide range of applications
Balanced Connection: The splitter cable adopts balanced XLR connection, with pin 2 connected to pin 2, pin 3 connected to pin 3, and pin 1 connected to pin 1; This balanced connection helps reduce interference and ensure strong signals without distortion
Heavy Duty Structure: The XLR splitter cable adopts a sturdy metal housing and plated connectors to ensure long durability and service life; 22AWG double shielded cable provides signal transfer with low noise, making it suitable for more audible devices
[Support data and audio signal transmission]-Female XLR to 1/4 Inch (6.35mm) TS Mono Jack Microphone Cable, has amazingly excellent clarity and the highest noise and radio frequency interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95%cy interference cancellation. The 3-core XLR cable design is known for greatly improving noise suppression, reducing noise by 95%
[Balanced Shielded Wire]-XLR cable 3-core outer braided oxygen-free copper shield and aluminum shield. Male XLR to 1/4 Inch (6.35mm) TS Mono Jack Microphone Cable,, gold-plated connectors. Ensure the smooth transmission of data and audio signals.
[High Quality]-These cables use thick wires, gold-plated connectors and solid connector shells. XLR Female XLR to 1/4 Inch (6.35mm) TS Mono Jack Microphone Cable, continue our tradition of providing the highest quality cables at the best prices.
[Multi-purpose]-XLR Female to 1/4 inch (6.35 mm) TS mono jack microphone cable, suitable for professional stage lighting instruments, moving head lights, par light spotlights, and various types of XLR input and output Musical instrument. Such as microphone, effector, mixer, equalizer, DMX LED, electronic organ, amplifier, electric guitar. Suitable for concert halls, schools, churches, studio lighting and recording, and many other professional audio settings.
Reviews
There are no reviews yet.
Be the first to review “MFL. 4-Way Isolated DMX Splitter Amplifier Distributor with 3-Pin Outputs”Cancel Reply
Download Pixel LED Effects 🤩
Pixel LED Effects Download Pack For LEDEdit, NeonPlay, LEDEasy, LEDBuild, Madrix, Jinx, and Glediator.
If you're looking for LED effects, you've come to the right place! Check out our unique animations for LEDEdit and more!
We offer a wide range of animations and effects that are compatible with LEDEdit, the popular LED control software. Our animations are designed to bring life to your LED displays and create stunning visual effects that will capture your audience's attention.
Files: 7000+
Size: 25 GB+
Formats: SWF, TOL, AVI, MP4, and GIF
Our led effects package was created by professionals, and our animations are specially designed for controllers and led programs!
Whether you're looking for simple animations or complex effects, our collection has something for everyone. From colorful transitions and scrolling text to dynamic graphics and mesmerizing patterns, our animations are sure to make your LED displays stand out.
So why wait? Start exploring our collection today and discover the perfect animations for your Pixel LED projects!
This pack contains hundreds of Pixel LED animations for programs that support your LED controller!
All effects in this pack are unique and were created by our team with years of experience in Pixel LED!
Look for a "Buy This Now!" button, click on it to start purchasing, and then download.
How can I pay for Pixel LED Effects Pack?
The payment method for the Pixel LED Effects is through credit or debit cards or PayPal, Your Visa card must be activated for online purchases by your bank.
Are these Pixel LED Effects working with LEDEdit Software?
Yes, Pixel LED Effects is designed to work with the LEDEdit software. LEDEdit is a popular software for programming and controlling LED lights, including pixel LEDs.
Reviews
There are no reviews yet.