SK6812 RGBW 4 in 1 Pixel LED Strip DC5V IP30

SK6812 RGBW LED Strip Light, 4 in 1; similar to WS2812B 1m 4m 5m 30 60 144 LEDs Individual Addressable RGBWW Led Lights IP30 65 67 5V.

Please Pay attention

1. The price includes only the LED strip, not the power supply or the pixel controller.
2. SK6812 RGBW Must Use a DC5V Power Supply and Pixels Controller to Control.
3. Every 0.5 meter with solder joints is very normal in an electronic product; it's not a quality problem.
4. The SK6812 RGBW LED strip can be cut between each LED to create custom lengths; do not bend the LED strip sharply.
5. The 3-pin SM connectors of the LED strip are included: Red: VCC; white: GND; green: DATA.
6. The LED strip has adhesive tape on the back of the PCB (except IP67). Please make sure the installation surfaces are smooth, clean, and dry.
7. For longer LED strip runs, please add more power to the 2-pin pin wire on both ends to reduce voltage drop.

Parameters SK6812 RGBW

• Gray level: 256
• View angle: 120°
• FPCB Width:10.0mm
• Input voltage: DC5V
• Color order: G R B W (not RGBW)
• light source: 5050 RGBW LED
• Full color: 32-bit (8 bits per channel)
• Power: 18 W/m, total 90 W
• Recommend power supply: DC5V20A (100W)
• Standard reel length: 16.4 ft/roll
• Model: SK6812 strip 5050RGBCW chips
• Operating Temperature:-20 ~ +50°C
• Led Qty: 300pcs RGB SMD 5050 per meter
• Product Dimensions:5000×2.13×10.0mm
• Signal:SK6812 RGBW IC (similar to WS2812b) SK6812 chip with a built-in LED
• Wavelength (nm): red, 620–630 nm; green, 515–5250 nm; blue, 460–470 nm
• Luminous flux: Red 0.5–1.0 lumens Green: 2-3 lumens Blue: 0.5-1.0 lumens White: 5-7 lumens
• Color: RGBCW=RGB+Natural White (4000K-5000K)
• Waterproof level: IP30 Non-waterproof

Note :

• The power supply or controller is not included. You need a separate controller and a separate power supply.
• The LED strip is made of 50-cm FPCB, so there is a solder point per 50-cm strip. But this minor flaw has no bad effect on the strip's performance. All the LED strips on the market are manufactured in half-meter lengths.
• Using a voltage of DC5V or higher than 6V will destroy it.
• The LEDs at the end may be dimmer because of the high resistance and the voltage drop as the current must flow to the end. Add DC5V voltage after every 16.4FT.

Features SK6812 RGBW

• Individually Addressable

Every LED has its own IC chip. One IC controls one LED. SK6812 chip built-in LED.

• 4 Colors in 1 LED

There are four colors in one LED: red, green, blue, and white. Richer color combinations mean more fantastic colors. Red, green, and blue are mixed whites. Natural white is pure white. Two kinds of white can be free to switch.

• Upgrade

The SK6812 RGBW LED strip is the newest upgraded version of the WS2812B LED strip.

• Cuttable

Every LED can be cut off; the LED strip is still working after it is cut. Cut it to the length you just need.

• Adhesive

There is adhesive tape on the back. You can paste it on the bookcase, TV, wine cabinet, ceiling, or windowsill easily. IP67 has no adhesive on its back.

• Install Easily

3-pin JST-SM connectors on both ends for easy installation; you can connect the other LED strip on both ends.

Application:

• Applicable for automobile and bicycle decoration, border, or contour lighting.
• Widely used for home decoration in hotels, clubs, and shopping malls.
• Architectural decorative lighting, boutique atmosphere lighting.
• Extensively applied in backlighting, concealed lighting, and channel letter lighting.
• Emergency and security lighting, advertisement sign lighting.
• Decorative lights for holidays, events, shows, and exhibitions.