Somspot 200W Moving Head Light Beam RGBW Stage Effect Lighting for DJ Disco Party Holiday Bar Club Wedding Birthday

Safety warning!

To ensure the safe and correct use of lamps, please read the following safety tips carefully before use to avoid unnecessary failures and injuries.

1. Non-professionals: do not disassemble the lamps and accessories inside the lamps without authorization.

2. AC power supply: Check whether the local power supply meets the product's rated voltage requirements.

3. The luminaire is designed according to the type of electric shock protection. The luminaire must be connected to a fully grounded power supply system, and the ground wire of the luminaire must be connected to the ground wire of the power supply system. Do not use a power cord with damaged insulation; do not use it. The power cord is bonded to other wires.

4. When installing and positioning the lamp, keep a minimum distance of 10 meters from any point on the surface of the lamp and any flammable and explosive materials, and 2.5 meters from the irradiated object. Please do not place the lamp directly on a burnable surface.

5. The ambient temperature of the lamp is -10 degrees + 40 degrees; the maximum surface temperature of the lamp is 80 degrees; and the lamp should be kept away from liquid substances and humid environments.

6. Before using the lamp, ensure that it is well grounded, and do not install or remove any parts while it is live.

7. When installing lamps, the fixing screws must be tightened, a safety cable must be added, and regular inspections must be made.

8. It is recommended that the continuous working time of the lamp not exceed 10 hours and the interval between the continuous startup of the lamp not be less than 10 minutes. Otherwise, it will not be triggered normally due to the overheating protection of the bulb.

9. During use, if the lamp is abnormal, stop using it in time.

10. When the bulb reaches the rated service life, it should be replaced in time; otherwise, there will be a dangerous accident of a bubble explosion.

11. The rotating parts of the lamps and the pasting accessories must be checked regularly, and if they are loose or shaken, they should be reinforced in time to prevent accidents.

12. The lamps are cooled by a strong wind, which makes it easy to accumulate dust. It must be cleaned once a month, especially the cooling air outlet; otherwise, it will be blocked by accumulated dust, resulting in poor heat dissipation and abnormal lamps.