SP107E Wireless Bluetooth Controller for LED Strip Pixel

SP107E Wireless Bluetooth Controller iOS Android DC5V~24V Great for WS2811, WS2812B, WS2801, and SK6812 Individually Addressable Programmable LED Strip Pixel Module Panel Lamp, Mic/AUX Input.

About this SP107E Wireless Bluetooth Controller

• Sound/music-activated controller: With this music controller, your LED lights can automatically change colors and running speed based on the music rhythm. It has 30 music-sync spectrum effects and color modes for the LED matrix and 18 music-sync color effects for the LED strip. The colors of the falling dot and light column are adjustable. Please play the video to watch the color effects.
• Rich non-music color modes: It also has 180 kinds of dynamic color-changing modes and many static solid colors such as red, blue, pink, etc., which are vivid and beautiful. Color hue, brightness, and speed are adjustable. When you connect SK6812-RGBW LEDs, the white channel can be adjusted individually.
• Build-in microphone and AUX IN: A high-sensitivity mic is built into the controller; it will capture any audio signal and activate your LED lights. If the music is input via the AUX IN port, the controller can only react to the music you input and exclude noise outside. Sound sensitivity adjustment is a big plus.
• The control pixel number is adjustable: The controller can control up to 960 LED pixels in total. You can set up the number of segments and pixels for each segment according to the LED pixel array of your lights. This feature is perfect for LED matrixes. After setting up the correct numbers, the spectrum color effects can be completely displayed, not partially displayed.

How to connect wires

Warning:

1. It can support WS2812B and WS2813, but there is no option on the settings page. Please choose WS2811 when connecting it to WS2812B and WS2813. When connecting the WS2813 LED strip, please connect the Bi-wire to the GND port.
2. It's not compatible with Samsung phones.
3. The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply; never use a 12V or 24V power supply.
4. The controller only supports LED lights with smart ICs. Without an IC, it cannot support an ordinary RGB/RGBW LED strip.
5. Please power the controller with a power supply, not a battery. The output power of the power supply must be greater than the maximum power of the LED light.
6. Please read the user manual to learn how to connect to WiFi and an LED strip. You can download the user manual in this page's “Technical Specification” column.

Similar SP107E Wireless Bluetooth Controller that may be delivered to you quickly:

New

DC5V 500pcs WS2811 12mm Diffused Digital RGB LED Pixel Light Individually Addressable Round LED Pixels Module IP68 Waterproof

• DC5V WS2811 LED Pixel Light (without power supply and controller)，50 LEDs *10 LOT， 12MM RGB with built-in WS2811 IC, ,0.3W per LED,Bulb spacing 3.2 inch (8cm),13ft (4m) per set
• IP68 waterproof and Durable ，for outdoor advertising, Christmas home decoration
• It comes with 3pin JST-SM connectors and separatepower/ground wires on both ends, Each pixel can be cut off, So you can shorten or extend the distance between two pixels ，can easily connect and cut
• Compatible with many controllers， It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.
• it is widely used in Channel Letters,Advertisement Signs,Commercial Sign,Message Display, Product Effect Display

$126.90

Buy on Amazon

New

BTF-LIGHTING WS2811 DC24V 32FT Addressable RGB LED Pixel Strip 600 LEDs 100Pixels Black PCB IP30, 10set 3PIN 10mm Width Right Angle L Shape Solderless Corner Connector(NO Adapter or Controller)

• 10m Continuous Length. NO Voltage Drop. It is designed with 24V DC input and 10m continuous length. Even if all the 600LEDs are turned on full white, no voltage drop. You don¡¯t need to inject power on the other ends. Perfect for large lighting project such as city skyline lighting,building outline decoration, hotel, KTV, bars, etc.
• WS2811 Addressable RGB LED Strip. Addressable groups of six LEDs.One WS2811 IC drive six LEDs .Dream full color Programmable LED Strip.5050SMD .256 brightness display and 24-bit color display.When attached to compatible controllers, it can display thousands of cool dynamic color effects, such as rainbow, wave, breathing, strobing, gradual change, color cycle, comet, fading, chasing, etc. If your controller can be programmed, it can show nearly unlimited combination of colors and gradients.
• User-friendly Design. Designed with 3pin JST-SM connectors on both ends for hooking up. Separated power/ground wires on both ends for injecting power. Each group can be cut and welded freely along the cutting line to meet different length requirements. Strong adhesive tape on the back make it easy to install. Fixed clips are also provided.Fixed clips can prevent the LED strip from falling off
• L Shape 3 Pins Connector 10mm is very safe to use. You need to simply slot strip light into connector and close (no need soldering). Can not support 144LED/m led strip. Can't Support ALTOVE LED Strip.
• It is for LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. For LED tape DIY project is Compatible with both waterproof and non-waterproof light strips.

$52.98

Buy on Amazon

New

wixure WIXUER® led Strip Light (33FT TM1934-24V-60B 5050 RGB IP67)

• TM1934 IC chip,address 6 LED groups. Fantastic full color programmable LED light strips. 5050SMD. 256 brightness display screen and 24 bit color display screen. Every 6 LED lights can be cut off without damaging the remaining strips. You can shorten, extend, or bend as needed. 100 IC=100 pixels=600 LED
• Dual signal. Continuous transmission of signal breakpoints. If a pixel is damaged, the following LEDs will still work. Static effects, flicker effects, special effects, etc. Comes with backup data. Maximum white brightness, 33 feet without voltage drop. Super bright.
• Flexible PCB board with 4-pin JST-SM connectors at both ends for easy installation and connection of LED light strips. Independent power supply/grounding wire at both ends, used to inject power in case of voltage drop. Suitable for K-1000C, SP602E, SP608E, SP105E, SP107E, SP108E Music Bluetooth APP controllers. DIY controllers: Rasp, R3, Mega, etc.
• Easy to install. There is no double-sided tape on the back. It comes with screws and clips instead of self-adhesive tape. 4-pin male connector and separate power/ground wires at both ends for easy connection to power supply. The back has an IP30/IP65 LED light strip, which can be easily pasted on walls or other items.
• Produce LED screens, LED walls, and advertising boards that can be affixed to hotels, KTVs, bars, outdoor advertising signs, holiday Christmas or wedding party decorations. There is double-sided tape on the back, so you can stick it to walls or other items as you like. IP67 waterproofing should be fixed with screws and clips, and there is no double-sided tape on the back of IP67.

$24.88

Buy on Amazon

New

BTF-LIGHTING WS2812B RGB ECO LED Strip,5050SMD Individual Addressable 16.4FT 30LED/m 150Pixels IP65 DC5V,10set 3PIN 10mm Width Right Angle L Shape solderless Corner Connector(NO Adapter or Controller)

• Individually Addressable. Dream full color Programmable LED Strip. Chasing Lighting, Rainbow ,Fire ,Meteor, rhythm, etc all kinds of scenes and special effects. WS2812B IC Built in 5050SMD. 256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
• Only Support DC5V. Never use DC12V or DC24V.Light up 1 color（red or green or blue or pure white) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED.It is not recommended to light up the maximum brightness mixed white light for a long time
• Economical and practical.Cost-effective. Alloy wire is not as expensive as pure gold wire,reduce cost of use.Great for small projects and beginners.More choices for customers.(Power supply or Controller is not included). BTF-LIGHTING also provides pure gold wires WS2812B LED Strip.
• L Shape 3 Pins Connector 10mm is very safe to use. You need to simply slot strip light into connector and close (no need soldering). Can not support 144LED/m led strip. Can't Support ALTOVE LED Strip.
• It is for LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. For LED tape DIY project is Compatible with both waterproof and non-waterproof light strips.

$26.98

Buy on Amazon

New

BTF-LIGHTING WS2812B RGB ECO LED Strip,5050SMD Individual Addressable 16.4FT 60LED/m 300Pixels IP65 DC5V,10set 3PIN 10mm Width Right Angle L Shape solderless Corner Connector(NO Adapter or Controller)

• Individually Addressable. Dream full color Programmable LED Strip. Chasing Lighting, Rainbow ,Fire ,Meteor, rhythm, etc all kinds of scenes and special effects. WS2812B IC Built in 5050SMD. 256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
• Only Support DC5V. Never use DC12V or DC24V.Light up 1 color（red or green or blue or pure white) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED.It is not recommended to light up the maximum brightness mixed white light for a long time
• Economical and practical.Cost-effective. Alloy wire is not as expensive as pure gold wire,reduce cost of use.Great for small projects and beginners.More choices for customers.(Power supply or Controller is not included). BTF-LIGHTING also provides pure gold wires WS2812B LED Strip.
• L Shape 3 Pins Connector 10mm is very safe to use. You need to simply slot strip light into connector and close (no need soldering). Can not support 144LED/m led strip. Can't Support ALTOVE LED Strip.
• It is for LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. For LED tape DIY project is Compatible with both waterproof and non-waterproof light strips.

$31.98

Buy on Amazon

New

BTF-LIGHTING WS2812B RGB ECO LED Strip,5050SMD Individual Addressable 16.4FT 60LED/m 300Pixels IP30 DC5V,10set 3PIN 10mm Width Right Angle L Shape solderless Corner Connector(NO Adapter or Controller)

• Individually Addressable. Dream full color Programmable LED Strip. Chasing Lighting, Rainbow ,Fire ,Meteor, rhythm, etc all kinds of scenes and special effects. WS2812B IC Built in 5050SMD. 256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
• Only Support DC5V. Never use DC12V or DC24V.Light up 1 color（red or green or blue or pure white) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED.It is not recommended to light up the maximum brightness mixed white light for a long time
• Economical and practical.Cost-effective. Alloy wire is not as expensive as pure gold wire,reduce cost of use.Great for small projects and beginners.More choices for customers.(Power supply or Controller is not included). BTF-LIGHTING also provides pure gold wires WS2812B LED Strip.
• L Shape 3 Pins Connector 10mm is very safe to use. You need to simply slot strip light into connector and close (no need soldering). Can not support 144LED/m led strip. Can't Support ALTOVE LED Strip.
• It is for LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. For LED tape DIY project is Compatible with both waterproof and non-waterproof light strips.

$29.98

Buy on Amazon