WS2812B WS2812 RGB LED Strip Light Tape T-1000S SD Card Pixels RGB LED Controller DC5V LED Transformer Kit 5m 10m.
Package Included:
30Leds/m
5m 30leds/m LED strip kit:
Package includes:
5m 30leds/m black/white pcb led strip ip30/ip65/ip67
1 set t-1000s led controller
1pc 5v 6a LED power supply
1pc 3pin JST connector
5 mo of 2-pin of 2-pin led wire
10 m, 30 l, 30 l/m LED strip kit:
Package includes:
1. 10m 30leds/m black/white pcb led strip ip30/ip65/ip67
1 set t-1000s led controller
1pc 5v 12a LED power supply
1pc 3pin JST connector
5 mo of 2-pin of 2-pin led wire
2. WS2812B LED strips can be cut for every “one” LED chip!
3. IP30 (non-waterproof) non-waterproof
IP65: Waterproof in Silicon Coating
IP67: Waterproof in Silicon Tube
4. The WS2812B LED strip works with DC5V, and it must be controlled by a WS2812B LED controller.
Product Description:
1) The WS2812B LED Strip is powered by a “5V power supply” (not included) and controlled by a single data line from a suitable controller (not included).
2) 3-Pin JST Connector Included: Red: VCC; Blue: GND; Green: DATA.
3) The strip has 3M adhesive tape on the back (except IP67). The installation surface must be smooth, clean, and dry.
4) An LED strip can be cut between every LED to create custom lengths.
5) Avoid sharply bending strips.
6) Longer runs should be powered from both ends to reduce voltage drop.
7) The 3-pin JST connector wire is 20AWG.
Products Application:
WS2812B dream color strips can be used for TV, hotel, KTV, bar, game room, and other leisure and entertainment decorations to heighten the atmosphere, car chassis, car decoration, shop decoration, home decoration, and other decoration.
Product details:
- Input voltage: DC5V
- Power: 30leds/m—-9watt/meter
- 60leds/m—-18watt/meter
- LED resource: WS2812B LED (5050 SMD RGB LED with built-in improved version of WS2811 IC)
- Each LED is individually controlled.
- IC Type: WS2812 IC (improved version) (built inside the 5050 SMD RGB LED)
- Of IC: 1 IC drives 1 LED chip
- Pixels: 30/60/meter
- Pitch: 16.6mm(1000/64)
- Greyscale: 256
- Bits/color: 8-bits/color
- FPC Width: 30 lb/m—-10 mm
- 60leds/m—-10mm
- FPC color: black/white
- Protection rate: IP30, IP65, and IP67
- Colors: full-color RGB, dream color changing
- Cuttable: Every LED is cuttable.
- Package: in an anti-static bag, IP30, IP65 with 3M adhesive tape on the back (IP67 without 3M adhesive).
T-1000S LED Controller
Description:
- Type: SD card
- Capacity:128MB-2GB
- Store file:*.led
- Physical parameters:
- Working temperature: -30–85 degrees Celsius
- Working voltage: DC5V/DC7.5-24V
- Working power:2W
- Weight:0.3kg
- Size: L165mm×W80mm×H30mm
- Signal port: 3-pin connect port
T-1000S System Features
- 32-65536 Gray Support software Gamma Correction.
- Support points, lines, surfaces, rules, and special-shaped handles.
- Single-port output can support 2048 pixels.
- Multiple controllers can be cascaded together and work synchronously. Playback content is stored on the SD card.
- Compatible with single- or double-line chips.
NOTE:
- When the T1000S controller loads less than 512 pixels, the frame rate can reach 30 fps.
- When T-1000s control more than 512 pixels, the frame rate will slow down automatically.
Connection:
Reviews
There are no reviews yet.