WS2815 DC12V WS2812B WS2813 LED Strip Light RGB Individually Addressable LED Lights Dual Signal 30 60 100 144 LEDs IP30 65 67

WS2815 DC12V WS2812B WS2813 LED Strip Light RGB Individually Addressable LED Lights Dual Signal 30 60 100 144 LEDs IP30 65 67.

12V WS2812B LED Strip:

The WS2815 LED strip is an upgraded version of the 5V WS2812B LED strip. For the 5M LED strip, even if all the LEDs are turned on in full white, the 12V version has no voltage drop. You don't need to inject power as frequently as in the 5V version.

Individually addressable:

Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want. A 256-bit brightness display and a 24-bit color display.

Dual-signal wires:

The WS2815 LED strip is similar to the version of the 5V WS2813 LED strip. It is designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.

Specifications:

• IC type: WS2815 IC.
• Gray level: 256.
• View angle: 120.
• Input voltage: DC12V.
• Color: full color, 24-bit.
• FPCB board color: white/black.
• Power: 0.3W/LED 30/60/100/144 LEDs/m.
• Model: WS2815 strip 5050 RGB chips.
• Storage Temperature: -30-+95.
• Operating Temperature: -20 ~ +85.
• LED quantity: 30/60/100/144pcs RGB SMD 5050 per meter.
• The distance between two LEDs is: 30 leds/m = 28mm, 60 leds/m = 12mm, 100 leds/m = 5mm, and 144 leds/m = 1.92mm.
• Wavelength (nm): red, 650 nm; green, 520 nm; blue, 460 nm.
• Waterproof level: IP30: non-waterproof; IP65: waterproof in silicone coating; IP67: waterproof in silicone tube.

Package includes:

• 1 x 1 m/5 m RGB 30/60/100/144 l/m LED strip.
• 1 x 4-pin connector.

Note:

• The power adapter and controller are not included!
• For a long time, it is forbidden to light up.

Please pay attention!

1. The price includes only the LED strip, not the power supply or the LED controller.

2. To control WS2815, a DC12V power supply and Pixel LED controller must be used.

3. Every 0.5 meter with solder joints is very normal in an electronic product; it's not a quality problem.

4. WS2815 LED strips can be cut between each LED to create custom lengths; please do not bend the LED strip sharply.

5. The LED strip has adhesive tape on the back of the PCB (except for IP67). Please make sure the installation surfaces are smooth, clean, and dry.

6. For longer LED strip runs, please power from a 2-pin power wire on both ends to reduce voltage drop.