ALITOVE 24V WS2811 Addressable RGB LED Pixel Lights, 32.8ft XConnect String, 50pcs 12mm IP68 Waterproof Bullet Pixels

ALITOVE 24V WS2811 Addressable RGB LED Pixel Lights, 32.8ft XConnect String, 50pcs 12mm IP68 Waterproof Bullet Pixels, 8-Inch Spacing for Outdoor Halloween, Christmas & House Decoration

Create stunning, colorful lighting displays with the ALITOVE 24V WS2811 Addressable RGB LED Pixel Lights. Designed for large-scale decorative lighting projects, this 32.8ft pixel string features 50 individually addressable 12mm RGB LED pixels with an 8-inch spacing between pixels, making it ideal for house outlines, rooflines, outdoor displays, holiday decorations, LED signs, and architectural lighting.

The upgraded 24V operating voltage helps reduce voltage drop across longer lighting runs compared with comparable 12V systems, helping maintain more consistent brightness when the installation is properly powered. Each pixel uses an F8 RGB LED chip and WS2811 control technology to deliver vibrant colors, adjustable brightness, and dynamic lighting effects.

Featuring a three-core XConnect connector and an IP68 waterproof design, this pixel string is built for demanding outdoor decorative applications. It supports compatible WS2811 SPI controllers, allowing you to create customized color patterns, animations, and synchronized lighting displays for Christmas, Halloween, parties, permanent outdoor lighting, and more.

Please note: A compatible 24V DC power supply and controller are required for operation and are not included.

Key Features

1. Upgraded 24V Operating Voltage

• Operates on a 24V DC power supply.
• Helps reduce voltage drop compared with comparable 12V pixel strings in longer installations.
• Helps maintain more consistent illumination when the system is properly designed and powered.
• Suitable for large-scale outdoor lighting, architectural outlines, LED screens, signs, and permanent holiday lighting projects.

2. Individually Addressable WS2811 RGB Pixels

• Features 50 digitally controlled RGB LED pixels per string.
• Each pixel can display different colors and brightness levels when used with compatible control software and hardware.
• Supports 24-bit RGB color and up to 16,777,216 possible color combinations.
• Offers 256 brightness levels for flexible lighting effects.
• Create colorful animations, chasing effects, gradients, flashing patterns, and customized decorative displays.

3. 32.8ft String with 8-Inch Pixel Spacing

• Total string length: 32.8ft.
• Pixel quantity: 50 LEDs.
• Pixel diameter: 12mm.
• Spacing: 8 inches between pixels.
• The wider spacing is ideal for outlining roofs, eaves, windows, fences, buildings, and other large areas without placing the lights too close together.
• Suitable for large-scale installations where broad coverage and clearly separated light points are desired.

4. Three-Core XConnect Compatibility

• Uses a three-core XConnect connector for compatible power, data, and ground connections.
• Includes a female XConnect pigtail to help connect the string to compatible controller ports or accessories.
• Suitable for modular lighting systems that use compatible three-core XConnect connections.
• Connector designs can vary between brands, so verify pinout, wiring, and physical compatibility before connecting.

5. IP68 Waterproof Design for Outdoor Use

• Components are sealed in a silicone housing designed to achieve an IP68 waterproof rating.
• Wiring uses cold-resistant, UV-resistant rubber for outdoor applications.
• Designed for use in rain, snow, and other challenging weather conditions when installed according to the manufacturer's requirements.
• Suitable for outdoor holiday displays, building outlines, garden decorations, and permanent decorative lighting projects.

Important: The IP68 rating applies to the specified pixel construction. Connections, power injectors, extension cables, and other accessories may have different protection ratings and may require additional weatherproofing.

6. Compatible with Multiple WS2811 SPI Controllers

This pixel string can be used with compatible WS2811 SPI controllers, including models and systems such as:

• Raspberry Pi-based compatible control systems
• T1000S and K1000C programmable controllers
• SP105E, SP638E, and SP630E Bluetooth controllers
• SP107E music-sync controller
• SP108E Wi-Fi controller
• SP530E smart voice controller
• SP602E and SP608E multi-channel controllers
• Other compatible WS2811 SPI controllers

Controller compatibility depends on the device's output signal, voltage requirements, pixel configuration, and software support. Confirm compatibility before purchasing or connecting.

Recommended Applications

• Christmas decorations: Rooflines, eaves, windows, fences, and festive outdoor displays.
• Halloween lighting: Spooky color effects, animated outlines, and themed decorations.
• Permanent house lighting: Architectural outlines and customized exterior lighting.
• Commercial displays: Building facades, storefronts, signs, and decorative LED installations.
• Events and parties: Colorful animated lighting for celebrations and special occasions.
• Large-scale projects: Outdoor billboards, LED walls, hotel exteriors, entertainment venues, and architectural lighting.

Installation and Usage Notes

1. Use a 24V DC power supply. Confirm the power supply's current capacity is sufficient for the complete installation.
2. Use a compatible controller. The string requires a compatible WS2811 SPI controller to display programmable effects.
3. Check connector compatibility. Verify the three-core XConnect connector's wiring and pinout before connecting it to equipment from another brand.
4. Plan power distribution carefully. Long runs and multiple strings may require additional power injection and suitable wiring to maintain reliable operation.
5. Protect all connections. Ensure connectors, extension cables, power injectors, and controller connections are suitably protected against moisture for outdoor use.
6. Test before installation. Check the power supply, controller settings, data direction, and pixel operation before permanently mounting the lights.

Package Information

The product listing describes one 32.8ft string containing 50 pieces of 12mm RGB pixel lights and a female XConnect pigtail. A power supply and controller are not included. Verify the seller's package contents before ordering if additional accessories are required.

Why Choose ALITOVE 24V WS2811 Pixel Lights?

The ALITOVE 24V WS2811 pixel string combines individually programmable RGB lighting, wide 8-inch spacing, a convenient XConnect interface, and an IP68-rated pixel design. Its 24V architecture makes it a practical option for larger decorative installations where thoughtful power distribution and consistent lighting are important.

Whether you're building a colorful Christmas display, creating Halloween effects, outlining a house, or designing a commercial outdoor lighting project, these addressable pixel lights provide flexible control for customized lighting designs.